Categories
0535 Cross-linkable Semi-conductive Inner Shielding Compound
-
1,0535 cross-linkable semi-conductive shielding compound is used as conductor shield and bonded insulation shield for
cross-linked polyethylene insulation power cable rated voltage up to 35KV. It’s suitable for high temperature vulcanization
processing method. 0535 provides fine surface smoothness, good extruding fluidity, low pre-cure or scorch characteristic,
stable volume resistivity and compatibility with both copper and aluminum conductors, strong bonding with insulation layer.
As 0535 bonded type was added in with special additive, it has excellence compatibility with copper conductor without
formation of copper-oxidation.
2. Packing
In Cardboard Box with inner PE bag, 600kg/box.
3. Technical Parameter
Property | Test Method | Unit | Value |
Density at 23°C | ASTM D 1505 | g/ cm3 | ≤ 1.10 |
Tensile Strength (200 mm/min) Tensile Strength Retention (Heat Aging at 135°C after 168h) | ASTM D 638 | MPA % | ≥ 17 85 |
Elongation at Break before ageing Elongation Retention (Heat Aging at 135°C after 168h) | ASTM D 638 | % % | 290 85 |
Volume Resistivity at 20°C Volume Resistivity at 90°C | ASTM-D991 | W.cm W.cm | 20 ≤ 200 |
Hot Set Test Conditions At 200 ±2 °C x 0.2 MPA for 15 min | IEC 540-14 | ||
Elongation after loading Permanent Deformation | % % | ≤ 60 ≤ 2 | |
Moisture Content | KARL FISCHER | ppm | ≤ 500 |
Brittleness Temperature | ASTM-D746 | -40°C |
4. Processing Conditions
ملفات تعريف درجات الحرارة القياسية الموصى بها هي كما يلي--------------------------------وحدة: °C
المنطقة | المنطقة 1 | المنطقة 2 | المنطقة 3 | المنطقة 4 | فلانج | أنبوب | المسمار |
نطاق درجة الحرارة درجة مئوية | 85-90 | 95-100 | 105-110 | 110-115 | 110-112 | 110-115 | 65-70 |
نقترح استخدام شبكة فلتر طبقة مزدوجة بحجم 40 شبكة (350 ميكروم).
نوصي بالتجفيف في 40 ~ 60'C لمدة 4 ساعات لإزالة الرطوبة قبل البثق.
5. التخزين
يجب تخزينها في درجات حرارة الغرفة بين 10 ~ 30 درجة مئوية. فترة التخزين القصوى الموصى بها في الجاف والنظيف هي
هو 12 شهرا غير مفتوحة وفي التعبئة الأصلية بعد التصنيع.